(6)Strongly push the ejector (the part indicated by the arrow in the figure) until the new power supply for the disk enclosure is inserted firmly, and secure the ejector with the screw.
When inserting the power supply for the disk enclosure into the disk enclosure, push it as far as it will go and then secure it with the screws. Incorrect insertion may cause a power supply failure again.
(7)When connecting the power cord to the power supply of the disk enclosure, push down the power cord stopper toward the left, insert the power cord, and secure the power cord by firmly fitting the power cord stopper into the receptacle of the power cord. After that, turn on the power switch.
- 50 -
