Check of Components in Package
(1)Unpacking
Open the package and take out the additional disk enclosure and accessories from the package without large shock. The additional disk enclosure is greatly heavy. Accordingly, if two people or less lift the unit, their back may be damaged. To take out the additional disk enclosure from the package, more than three people should always support the bottom of the unit without holding the power supply on the rear face and the projections of the adapter.
The package is specially designed for carriage of a precision device. Do not dispose of the package because it is required to return the additional disk enclosure to the factory for its repair.
(2)Inspection
After unpacking, check that all the components listed in the table below are provided. If any of the components is missed, contact your sales agent. Next, inspect the additional disk enclosure and accessories. If any of the components is damaged, contact your sales agent.
No. | Product name | Remarks | Qty |
1 | Additional Disk Enclosure |
| 1 |
2 | Power cord | Length 5 m (for 100 - 120 VAC) | 2 |
3 | HSSDC cable | Length 1m | 2 |
4 | DE diagnosis cable | Length 1m | 2 |
5 | Front mask |
| 1 |
6 | Key |
| 1 |
7 | User's Guide (this document) |
| 1 |
8 | Packing list |
| 1 |
9 | Location label |
| 1 |
10 | Rack mount kit | For NEC Storage rack (L and R) | 1 |
*Use the HSSDC cable and DE diagnosis cable provided with the additional disk enclosure for connecting disk array unit NEC Storage S2300 with the additional disk enclosure. A DE cable set
- viii -
