Wireless Configuration and Security
122
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
6. In the WPS Setup Method section of the screen, use one of the following methods to initiate
the WPS process for a wireless device:
•PIN method:
a. Collect the pin of the wireless device.
b. In the Station PIN field, enter the pin.
c. Click the PIN button.
•Push button configuration (PBC) method:
a. Click the PBC button.
b. Within 2 minutes, press the WPS button on your wireless device to enable the
device to connect the access point of the wireless VPN firewall, or follow the
WPS instructions that came with the device.
With either method, the wireless VPN firewall tries to communicate with the wireless
device, set the wireless security for the wireless device, and allow it to join the wireless
network.
Note: There is no physical WPS push button on the wireless VPN firewall.
Configure Advanced Radio Settings
To configure advanced radio settings:
1. Select Network Configuration > Wireless Settings > Radio Settings. The Radio
Settings screen displays (see Figure 52 on page 105).
2. On the Radio Settings screen, to the right of the Wireless Profiles tab, click the
Advanced option arrow. The Advanced Wireless screen displays:
Figure 59.