Network and System Management
323
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Note: When remote management is enabled and administrative access
through a WAN interface is granted (see Configure Login Policies on
page 299), the wireless VPN firewall’s web management interface is
accessible to anyone who knows its IP address and default
password. Because a malicious WAN user can reconfigure the
wireless VPN firewall and misuse it in many ways, NETGEAR highly
recommends that you change the admin and guest default
passwords before continuing (see Change Passwords and
Administrator and Guest Settings on page 320).
To configure the wireless VPN firewall for remote management:
1. Select Administration > Remote Management. The Remote Management screen
displays the IPv4 settings (see the next screen).
2. Specify the IP version for which you want to configure remote management:
•IPv4. In the upper right of the screen, the IPv4 radio button is already selected by
default. Go to Step 3.
Figure 194. Remote Management screen for IPv4