Firewall Protection
187
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
3. Click the Add table button. The new port-triggering rule is added to the Port Triggering Rules
table.
To edit a port-triggering rule:
1. In the Port Triggering Rules table, click the Edit table button to the right of the
port-triggering rule that you want to edit. The Edit Port Triggering Rule screen displays.
2. Modify the settings that you wish to change (see the previous table).
3. Click Apply to save your changes. The modified port-triggering rule is displayed in the Port
Triggering Rules table.
To remove one or more port-triggering rules from the table:
1. Select the check box to the left of each port-triggering rule that you want to delete, or
click the Select All table button to select all rules.
2. Click the Delete table button.
To display the status of the port-triggering rules:
Click the Status option arrow in the upper right of the Port Triggering screen. A pop-up
screen displays, showing the status of the port-triggering rules.
Figure 102.
Configure Universal Plug and Play
The Universal Plug and Play (UPnP) feature enables the wireless VPN firewall to
automatically discover and configure devices when it searches the LAN and WAN.
Note: UPnP is supported for IPv4 devices only.
Outgoing (Trigger)
Port Range Start Port The start port (1–65535) of the range for triggering.
End Port The end port (1–65535) of the range for triggering.
Incoming (Response)
Port Range Start Port The start port (1–65535) of the range for responding.
End Port The end port (1–65535) of the range for responding.
Table 40. Port Triggering screen settings (continued)
Setting Description