Virtual Private Networking Using IPSec and L2TP Connections
227
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
To enable or disable one or more VPN policies:
1. Select the check box to the left of each policy that you want to enable or disable, or click
the Select All table button to select all VPN Policies.
2. Click the Enable or Disable table button.
For information about how to add or edit a VPN policy, see Manually Add or Edit a VPN
Policy on this page.
Manually Add or Edit a VPN Policy
To manually add a VPN policy:
1. Select VPN > IPSec VPN > VPN Policies. The VPN Policies screen displays the IPV4
settings (see Figure 139 on page 226).
2. Under the List of VPN Policies table, click the Add table button. The Add New VPN Policy
screen displays the IPv4 settings (see the next screen, Figure 140 on page 228).
3. Specify the IP version for which you want to add a VPN policy:
•IPv4. In the upper right of the screen, the IPv4 radio button is already selected by
default. Go to Step 4.
•IPv6. Select the IPv6 radio butto n. The Add New VPN Policy screen for IPv6 displays
(see Figure 141 on page 229).