LAN Configuration
89
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
4. Click Apply to save your settings.
IPv6 DMZ Address Pools
If you configure a stateful DHCPv6 server for the DMZ, you need to add local DHCP IPv6
address pools so the DHCPv6 server can control the allocation of IPv6 addresses in the
DMZ.
To add an IPv6 DMZ address pool:
1. On the DMZ Setup screen for IPv6 (see Figure 43 on page 87), under the List of IPv6
Address Pools table, click Add. The DMZ IPv6 Config screen displays:
Figure 44.
DHCP Status
(continued) DNS Server Select one of the DNS server options from the drop-down lists:
• Use DNS Proxy. The wireless VPN firewall acts as a proxy
for all DNS requests and communicates with the ISP’s DNS
servers that you configured on the Broadband ISP Settings
(IPv6) screen (see Configure a Static IPv6 Internet
Connection on page 39).
• Use DNS from ISP. The wireless VPN firewall uses the ISP’s
DNS servers that you configured on the Broadband ISP
Settings (IPv6) screen (see Configure a Static IPv6 Internet
Connection on page 39).
• Use below. When you select this option, the DNS server
fields become available for you to enter IP addresses.
Primary DNS Server
Secondary DNS Server
Lease/Rebind
Time Enter the period after which the DHCP lease is renewed with
the original DHCP server or rebound with another DHCP
server to extend the existing DHCP lease. The default period is
86400 seconds (24 hours).
Table 18. DMZ Setup screen settings for IPv6 (continued)
Setting Description