Wireless Configuration and Security
121
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Note: For a list of other Wi-Fi-certified products available from NETGEAR,
go to http://www.wi-fi.org.
To enable WPS and initiate the WPS process on the wireless VPN firewall:
1. Select Network Configuration > Wireless Settings > Wireless Profiles. The Wireless
Profiles screen displays (see Figure 54 on page 112).
2. On the Wireless Profiles screen, to the right of the Wireless Profiles tab, click the WPS
option arrow. The WPS screen displays:
Figure 58.
3. From the Select Wireless Profile SSID drop-down list, select the name of the SSID for which
you want to enable WPS. The wireless profile with which the SSID is associated needs to be
configured for WPA, WPA, or WPA+WPA2 security in order to be displayed as a selection in
the drop-down list.
4. From the WPS Status drop-down list, select Enabled to enable the WPS feature.
5. Click Apply to save your changes.
Note: The Security, Authentication, and Encryption fields are nonconfigurable
fields that are for information only.