Internet and Broadband Settings
33
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
6. In the Internet (IP) Address section of the screen (see the following figure), configure the IP address settings as explained in the following table. Click the Current IP Address link to see the currently assigned IP address.
Other (PPPoE)
Note: For login
and password
information, see
Step 2 and Step 3.
If you have installed login software, then your connection type is PPPoE. Select this
radio button, and enter the following settings:
Account Name The valid account name for the PPPoE connection.
Domain Name The name of your ISP’s domain or your domain name if your ISP
has assigned one. You can leave this field blank.
Idle Timeout Select the Keep Connected radio button to keep the connection
always on. To log out after the connection is idle for a period of time,
select the Idle Timeout radio button and, in the Idle TImeout field,
enter the number of minutes to wait before disconnecting. This is
useful if your ISP charges you based on the period that you have
logged in.
Connection
Reset Select the Connection Reset check box to specify a time when the
PPPoE WAN connection is reset, that is, the connection is
disconnected momentarily and then reestablished. Then, specify the
disconnect time and delay.
Disconnect
Time Specify the hour and minutes when the connection
should be disconnected.
Delay Specify the period in seconds after which the
connection should be reestablished.

Table 3. PPTP and PPPoE settings (continued)

Setting Description