Firewall Protection
151
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
To access the LAN DMZ Rules screen for IPv6 or to make changes to existing IPv6
rules:
1. Select Security > Firewall > LAN DMZ Rules. The Firewall submenu tabs display with
the LAN DMZ Rules screen for IPv4 in view.
2. In the upper right of the screen, select the IPv6 radio button. The LAN DMZ Rules screen
displays the IPv6 settings. (The following figure contains examples.)
Figure 74.
To make changes to an existing outbound or inbound service rule, in the Action column to the
right of to the rule, click one of the following table buttons:
•Up. Moves the rule up one position in the table rank.
•Down. Moves the rule down one position in the table rank.
•Edit. Allows you to make any changes to the rule definition of an existing rule. Depending
on your selection, one of the following screens displays:
-Edit LAN DMZ Outbound Service screen for IPv6 (identical to Figure 76 on page 153)
-Edit LAN DMZ Inbound Service screen for IPv6 (identical to Figure 78 on page 155)
To enable, disable, or delete one or more IPv4 or IPv6 rules:
1. Select the check box to the left of each rule that you want to enable, disable, or delete,
or click the Select All table button to select all rules.
2. Click one of the following table buttons:
•Enable. Enables the rule or rules. The ! status icon changes from a gray circle to a
green circle, indicating that the selected rule or rules are enabled. (By default, when a
rule is added to the table, it is automatically enabled.)
•Disable. Disables the rule or rules. The ! status icon changes from a green circle to a
gray circle, indicating that the selected rule or rules are disabled.
•Delete. Deletes the selected rule or rules.