Network and System Management
329
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
2. Enter the settings as explained in the following table:
3. Click Apply to save your changes.
Manage the Configuration File
The configuration settings of the wireless VPN firewall are stored in a configuration file on the
wireless VPN firewall. This file can be saved (backed up) to a computer, retrieved (restored)
from the computer, cleared to factory default settings, or upgraded to a new version.
Once the wireless VPN firewall is installed and works correctly, make a backup of the
configuration file to a computer. If necessary, you can later restore the wireless VPN firewall
settings from this file.
The Backup & Restore Settings screen lets you:
•Back up and save a copy of the current settings (see Back Up Settings on page 330)
•Restore saved settings from the backed-up file (see Restore Settings on page 331)
•Revert to the factory default settings (see Revert to Factory Default Settings on
page 331)
•Update the firmware (see Update the Firmware on page 332)
To display the Settings Backup and Firmware Upgrade screen, select Administration >
Settings Backup & Upgrade.
Table 80. SNMP SysConfiguration screen settings
Setting Description
SysContact Enter the SNMP system contact information that is available to the SNMP manager.
This setting is optional.
SysLocation Enter the physical location of the wireless VPN firewall. This setting is optional.
SysName Enter the name of the wireless VPN firewall for SNMP identification purposes. The
default name is FVS318N.