Internet and Broadband Settings
39
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
7. To verify the connection, click the Status option arrow in the upper right of the screen to
display the Connection Status pop-up screen. (The following figure shows a dynamic IP
address configuration.)
Figure 18.
The Connection Status screen should show a valid IP address and gateway, and you are
connected to the Internet. If the configuration was not successful, see Troubleshoot the
ISP Connection on page 370.
Note: For more information about the Connection Status screen, see View
the WAN Port Status on page 356.
Configure a Static IPv6 Internet Connection
To configure a static IPv6 Internet connection, you need to enter the IPv6 address information
that you should have received from your ISP.
To configure static IPv6 broadband ISP settings:
1. Select Network Configuration > WAN Settings > Broadband ISP Settings.
2. In the upper right of the screen, select the IPv6 radio button. The ISP Broadband Settings
screen displays the IPv6 settings: