Internet and Broadband Settings
38
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
To automatically configure the WAN port for an IPv6 connection to the Internet:
1. Select Network Configuration > WAN Settings > Broadband ISP Settings.
2. In the upper right of the screen, select the IPv6 radio button. The ISP Broadband Settings
screen displays the IPv6 settings:
Figure 17.
3. In the Internet Address section of the screen, from the IPv6 drop-down list, select DHCPv6.
4. In the DHCPv6 section of the screen, select one of the following radio buttons:
•Stateless Address Auto Configuration.
•Stateful Address Auto Configuration.
5. As an optional step: If you have selected the Stateless Address Auto Configuration radio
button, you can select the Prefix Delegation check box:
•Prefix delegation check box is selected. A prefix is assigned by the ISP’s stateful
DHCPv6 server through prefix delegation. For example, 2001:db8:: /64. The wireless
VPN firewall’s stateless DHCPv6 server can assign this prefix to its IPv6 LAN clients.
For more information about prefix delegation, see Stateless DHCPv6 Server With
Prefix Delegation on page 71.
•Prefix delegation check box is cleared. Prefix delegation is disabled. This is the
default setting.
6. Click Apply to save your changes.