Wireless Configuration and Security
118
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Note: For wireless adapters, you can usually find the MAC address printed
on the wireless adapter.
To allow or restrict access based on MAC addresses:
1. On the Wireless Profiles screen (see Figure 54 on page 112), click the ACL button in the
ACL column for the wireless profile for which you want to set up access control. The
MAC Address Filtering screen displays. (The following figure shows some examples.)
Figure 56.
2. Click Add to open the MAC Address screen (not shown in this manual).
3. Enter a MAC address in the MAC Address field.
4. Click Apply to add the MAC address to the MAC Address table on the MAC Address
Filtering screen.
5. Repeat Step 2 through Step 4 for any other MAC address that you want to add to the MAC
Address table.
6. From the ACL Policy Status drop-down list, select if access control is enabled, and if so, how
the MAC addresses in the MAC Address table are treated:
•Open. Access control is disabled. All MAC addresses, including the ones in the MAC
Address table, are allowed access.
•Allow. Only the MAC addresses in the MAC Address table are allowed access. All
other MAC addresses are denied access.
•Deny. The MAC addresses in the MAC Address table are denied access. All other
MAC addresses are allowed access.
7. Click Apply to save your settings.