Firewall Protection
153
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

IPv6 LAN DMZ Outbound Service Rules

To create a new IPv6 LAN DMZ outbound rule:
1. In the upper right of the LAN DMZ Rules screen, select the IPv6 radio button. The screen
displays the IPv6 settings (see Figure 74 on page 151).
2. Click the Add table button under the Outbound Services table. The Add LAN DMZ
Outbound Service screen for IPv6 displays:
Figure 76.
3. Enter the settings as explained in Table 32 on page 128. In addition to selections from the
Service, Action, and Log drop-down lists, you need to make selections from the following
drop-down lists:
•LAN Users
•DMZ Users
Unless your selection f rom the Action drop-down list is BLOCK always, you also need to
make a selecti o n from the following drop-down list:
•Select Schedule
4. Click Apply. The new rule is now added to the Outbound Services table. The rule is
automatically enabled.
Create LAN DMZ Inbound Service Rules
The Inbound Services table lists all existing rules for inbound traffic. If you have not defined
any rules, no rules are listed. By default, all inbound traffic (from the LAN to the DMZ) is
blocked.