NETGEAR ProSafe 802.11g Wireless Access Point WG102 Reference Manual
•Support Registration card.
Contact your reseller or customer support in your area if there are any missing or damaged parts. See the Support Information Card for the telephone number of customer support in your area. You should keep the Support Information card, along with the original packing materials, and use the packing materials to repack the WG102 if you need to return it for repair. To qualify for product updates and product warranty registrations, we encourage you to register on the NETGEAR Web site at: http://www.NETGEAR.com.
Hardware Description
The NETGEAR WG102 ProSafe 802.11g Wireless Access Point front and rear hardware functions are described below.
Front Panel
Figure
Viewed from left to right, the WG102 has these four status LEDs: PWR, TEST, LAN, and WLAN.
LED | Description |
|
|
|
|
PWR | Power Indicator |
|
|
|
|
| Off | No power. If this LED does not come on with the power adapter and |
|
| cord correctly installed, see Chapter 5, “Troubleshooting. |
|
|
|
| On | Power is on. |
|
|
|
TEST | Self Test Indicator |
|
|
|
|
| Blink | Indicates self test, loading software, or system fault (if continues). |
|
| Note: This LED may blink for a minute before going off. |
Basic Installation and Configuration |
