![](/images/new-backgrounds/1188955/18895587x1.webp)
NETGEAR ProSafe 802.11g Wireless Access Point WG102 Reference Manual
Table 3-1. General Information Fields
Field | Description |
|
|
Access Point Information |
|
|
|
Access Point Name | The default name may be changed if desired. |
(NetBIOS name) |
|
|
|
Country/Region | The domain or region for which the wireless access point is licensed for |
| use. It may not be legal to operate this wireless access point in a region |
| other than one of those identified in this field. |
Firmware Version | The version of the firmware currently installed. |
|
|
Access Point Mode | The operating mode of the WG102: Access Point, |
| |
|
|
VLAN (802.1Q) | Indicates if VLAN support is enabled. The default is disabled. |
|
|
Management VLAN ID | Displays the VLAN ID. |
|
|
Current IP Settings |
|
|
|
IP Address | The IP address of the wireless access point. |
|
|
Subnet Mask | The subnet mask for the wireless access point. |
|
|
Default Gateway | The default gateway for the wireless access point communication. |
|
|
DHCP Client | If this is enabled, the current IP address was obtained from a DHCP |
| server on your network. Disabled indicates a static IP configuration. |
|
|
MAC Address | The Media Access Control address (MAC address) of the wireless |
| access point’s Ethernet port. |
|
|
Current Wireless Settings |
|
|
|
Channel/Frequency | The channel the wireless port uses. The default channel setting is |
| automatic channel selection. For the frequencies used on each |
| channel, see the link to the online document “Wireless |
| Communications” in Appendix B.” |
Security Profiles | For each Security Profile, the following are displayed: Profile name, |
| SSID, security option, VLAN ID, and enabled/disabled. |
Management |