NETGEAR WG102NA manual Select the Turn Access Control On check box

NETGEAR ProSafe 802.11g Wireless Access Point WG102 Reference Manual

2.Below the Security heading, select Access Control to display the Access Control List screen shown below.

Figure 2-5

3.Select the Turn Access Control On check box.

4.Choose to use the local MAC address database stored on the access point, or use the RADIUS MAC address database stored on a RADIUS server.

•If you choose the RADIUS MAC Address Database, you must configure the RADIUS Server Settings first.

•If you choose Local MAC Address Database, either select from the list of available wireless cards the WG102 has found in your area, or enter the MAC address and device name for a device you plan to use. You can usually find the MAC address printed on the wireless adapter. Click Add to add the wireless device to the access list. Repeat these steps for each additional device you want to add to the list.

5.Be sure to click Apply to save your wireless access control list settings.

Now, only devices on this list will be allowed to wirelessly connect to the WG102 Access Point.

Configuring Security 2-11

v1.0, July 2008