View Guest Network Settings | NETGEAR JWNR2010v5, WNR2020, WNR618

N150 and N300 Wireless Routers

The user name is admin. The default password is password. The user name and password are case-sensitive.

The BASIC Home screen displays.

4.Click the ADVANCED tab.

The Wireless Settings pane displays the following information:

•Name (SSID). The wireless network name (SSID) that the router uses.

•Region. The geographic region where the router is used. It might be illegal to use the wireless features of the router in some parts of the world.

•Channel. The operating channel of the wireless port. The default channel is Auto. When Auto is selected, the router finds the best operating channel available.

•Mode. The wireless communication mode: Up to 54 Mbps, Up to 150 Mbps (the default), or Up to 300 Mbps.

•Wireless AP. Indicates whether the radio of the router is enabled. If the radio is not enabled, the WiFi LED on the front panel is off.

•Broadcast Name. Indicates whether the router is broadcasting its SSID.

•Wireless Isolation. Indicates whether wireless isolation is on or off. When it is off, wireless clients (computers or wireless devices) that join the network can use the Internet, but cannot access each other or access Ethernet devices on the network.

•Wi-Fi Protected Setup. Indicates whether Wi-Fi Protected Setup is configured for this network.

View Guest Network Settings

To view the guest network settings:

1.Launch a web browser from a computer or wireless device that is connected to the network.

2.Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays.

3.Enter the router user name and password.

The user name is admin. The default password is password. The user name and password are case-sensitive.

The BASIC Home screen displays.

4.Click the ADVANCED tab.

The Guest Network pane displays the following information:

•Name (SSID). The wireless network name (SSID) that the router uses. The default name is NETGEAR-Guest.

•Wireless AP. Indicates whether the radio of the router is enabled for the guest network.

Manage Your Network

60

Image 60

NETGEAR JWNR2010v5, WNR2020, WNR618, WNR614, JWNR2000v5 View Guest Network Settings,  To view the guest network settings

Contents

N150 and N300 Wireless Routers Models Support ComplianceTrademarks Contents Manage Your Network Appendix a Supplemental Information Hardware Setup Hardware Features Front Panel LEDsBack Panel  To prepare your router for installation Position Your Router To position your router Cable Your Router  To cable your router Verify the Cabling Connect to the Network Access the Router Wired Connection WiFi Connection To use WPS to connect to the WiFi network  To find and select the WiFi network Types of Logins Use a Web Browser to Access the RouterNetgear genie Automatic Internet Setup  To use Netgear genie to set up your router Log In to the Router To log in to the router Connect to the Network and Access the Router Specify Your Internet Settings Use the Internet Setup Wizard  To use the Setup WizardSelect Advanced Setup Wizard Manually Set Up the Internet Connection Specify an Internet Connection Without a Login To specify the Internet connection settings Specify an Internet Connection That Uses a Login  To view or change the basic Internet setup Select Internet Change the MTU Size Select Advanced Setup WAN Setup  To change the MTU size Common MTU sizes Networking View or Change WAN Settings  To view or change the WAN settings Set Up a Default DMZ Server  To set up a default DMZ server Change the Router’s Device Name To change the router’s device name Change the LAN TCP/IP Settings Select Advanced Setup LAN Setup To change the LAN TCP/IP settings LAN IP address RIP Version list, select one of the following Specify the IP Addresses that the Router Assigns Disable the Dhcp Server Feature in the Router  To disable the Dhcp server feature in the routerReserve LAN IP Addresses  To reserve an IP address  To edit a reserved address entry Use the WPS Wizard for WiFi Connections  To delete a reserved address entry To use the WPS Wizard Select Advanced WPS Wizard Specify Basic WiFi Settings  To specify basic wireless settings Select Wireless Change the WiFi Security Option  To change the WPA settings Set Up a Guest Network  To set up a guest networkSelect Guest Network Control the Wireless Radio Enable or Disable the Wireless Radio To enable or disable the wireless radio Set Up a Wireless Schedule Select Advanced Advanced Setup Wireless Settings To set up the wireless schedule Set up a Wireless Access List Networking Specify WPS Settings Wireless Distribution System To specify WPS Settings Set Up the Base Station  To set up the base stationSelect Advanced Advanced Setup Wireless Repeating Function Set Up a Repeater Select the Enable Wireless Repeating Function check box To configure the router as a repeater Complete the Repeater IP Address field  To set up a static route Select Advanced Advanced Setup Static RoutesStatic Routes  To edit a static route View Devices Currently on the Network  To delete a static route To view devices on the network  To enable Universal Plug and Play Improve Network Connections with Universal Plug and PlaySelect Attached Devices Select Advanced Advanced Setup UPnP Manage Your Network Update the Router Firmware  To check for new firmware and update your routerSelect Advanced Administration Firmware Update Change the admin Password Recover the admin Password To set the password for the user name admin Select Advanced Administration Set Password Select the Enable Password Recovery check box  To recover your password View Router Status  To view router status and usage informationClick the Advanced tab LAN Port View the Internet Connection Settings  To view the Internet connection settingsDisplay Internet Port Statistics  To display Internet port statistics View the Internet Connection Status  To check the Internet connection status  To change the router Dhcp connection settings Dhcp Connection View Wireless Settings  To change the router PPPoE connection settings To change the router Pptp connection settings  To view the wireless settings View Guest Network Settings  To view the guest network settings Reboot the Router Manage the Configuration File To reboot the router Do not interrupt the reboot process Back Up Settings Restore Configuration Settings To back up the router’s configuration settings Select Advanced Administration Backup Settings Erase Configuration Settings Troubleshooting Forgotten Passwords Admin PasswordWiFi Passwords WiFi Connections  To use a wired connection to view WiFi settings Apply Power to the Router and Check the LEDs  To apply power to the router and check the LEDsChanges Not Saved Troubleshoot with the LEDs Power LED Is Off or Blinking Power LED Stays AmberAll LEDs Remain Lit Internet LEDs Is Off WiFi LED Is Off Cannot Log In to the Router Router Cannot Access the Internet  To check the WAN IP address Troubleshoot Internet Browsing Troubleshoot a PPPoE Internet Connection To troubleshoot a PPPoE Internet connection Troubleshoot Your Network Using the Ping Utility Test the LAN Path to Your Router To ping the router from a computer running Windows Test the Path from Your Computer to a Remote Device Request timed out Troubleshoot IP Addresses Supplemental Information Factory Settings Router factory default settings Technical Specifications Router specifications