Ricoh L4130, L4160 Performing the station maintenance without key, Press Key in the Remote

Set the media feeding

6	Press the	key.
	• Print a correction pattern again and check it.

• When media correction is needed, perform the operation in Step 5 to make correction.

F E ED COMP .
PR I N T	[ ENT ]

7 Press the key several times to end the setting.

Performing the station maintenance without key

You can select “FEED COMP.” by using the key in the Local without pressing the key.

Press the key in Local.

Press to

select [SETUP].

Press the key twice.

•It becomes the same condition as the key is pressed from Local.

Correcting Media-feeding during Printing

A media-feeding rate can be corrected even in the remote mode or when image data is printed.

1 Press the key in the Remote.

* REMOT E *

* * . * * mm

F EED COMP . 0 X 0

			Current	[FEED COMP.] value
2	Press	to enter a corrected feeding rate.
	• Corrected feeding rate: -255 to 255
	• The value entered here is reflected in the corrected feeding rate soon.
3	Press the	key.	* REMOT E *
	• The changed value is registered.			* * . * * mm

•When you press the key instead of the key, the value entered here will be invalid.

2-24