Ricoh L4160, L4130 operation manual Setting a Media

Setting a Media

Note for media setting

When setting media, read the following notes carefully.

• Take care not to drop the media on a foot or so when the media is set. It may cause an injury due to the media.

• There is a cutter inside the machine for cutting the print media. Do not touch any parts other than the ones described in this manual when loading and replacing paper, removing jammed paper, and cleaning the media transfer surface.

•Be careful not to get your fingers caught inside the machine and injured when replac- ing paper.

•Be careful not to get your fingers caught inside the machine when opening and clos- ing the cover of the paper feed section.

•Hold the roll paper horizontally with both of your hands. When the roll paper is set in the paper holder, the paper may fall off from the folder and cause injury if you hold the holder vertically.

•The roll stopper arm works with the clamp lever. Do not push the clamp lever down while roll stopper is caught between the roll stopper arm and this machine. The roll stopper arm might be broken and roll stopper function *1 might be disabled.

OK

Device

side

Roll

holder

Device

side

Roll

holder

Roll stopper arm

Roll stopper

Roll stopper arm

Roll stopper

2

Basic Operations

*1. The function that once pulled out a certain amount of media, media pullout is temporarily locked.

2-7