Ricoh L4160, L4130 operation manual Printing the Remaining Amount of a Media, LOCAL, Press

Machine Settings

Printing the Remaining Amount of a Media

The present remaining amount of a media can be printed.

•	Set "Remaining amount of a media to display" to "ON".
•	When you replace the media you use now with another, it is recommended that you print the
	remaining amount of the media on it.With the remaining amount of a media having been printed
	beforehand, when you use the replaced media again, you can enter an accurate value in the screen
	for entering the remaining amount of a media (	P.2-12)that appears after media detection.

1	In LOCAL, Press	.	OR I G I N	SE T UP
	• LOCAL changes to the origin setting mode.		0 . 0	- - - -

2 Press to set a light point of the LED pointer to the changing position.

• Move the carriage and media with	and set	OR I G I N	SE T UP
the origin.
		0 . 0	0 . 0
• When you do not change the origin, do not press
and proceed to Step 3.		Origin	Origin
		(Length)	(Width)

•When you press the key here, the origin is changed, and the screen returns to LOCAL.

3	Press the	key.		MED I A REMA I N PR I N T
	• When you press		, the screen returns to	< ENT >
	Step 2.
	• When you press the		key, the screen returns to LOCAL.

4	Press the	key.
	• The remaining amount of a media starts to be printed.

• When the printing has been completed, the screen returns to LOCAL.

• When the remaining amount of a media has been printed with the origin changed, the origin set here is effective even when subsequent data are printed.

3

Convenient use

3-13