Ricoh L4130, L4160 operation manual Reset the set value, Select the Check by pressing Key

When Nozzle Clogging Cannot Be Solved

2 Select the [CHECK] by pressing key.

NOZ Z L E RECOVERY : CHECK

3	Press the	key.
	• The mode for which nozzle recovery is invalid is displayed.

• If there is no mode for which nozzle recovery is invalid, “NONE” is displayed.

Level at printing white layer

UNRECOV ERA B L E COND .

: 1 2 0 0 x 1 2 0 0 2 4 p H L v 1

Scanning speed Resolution Number of passes

4 Press the key several times to end the setting.

Reset the set value

1	Select [NOZZLE RECOVERY] of the maintenance menu.
	(1) Press the		key in LOCAL.
	(2) Press		to select [MAINTENANCE] and press the		key.
	(3) Press		to select [NOZZLE RECOVERY].
	(4) Press the		key.
2	Select the [RESET] by pressing			key.	NOZ Z L E	RECOVERY
					: RES E T
3	Press the		key.		S E L EC T	RES E T	NOZ Z L E
					: H 1 - A
4	Select the Nozzle line that needs clear the setting				S E L EC T	RES E T	NOZ Z L E
	value by pressing		key. Then press		: H 1 - A
	key.
					H 1 - A RE S E T
					E X ECU T E		[ ENT ]
5	Press the		key.
6	Press	the key several times to end the setting.

4-24