Ricoh L4160 Stopping a printing operation halfway, Deleting Received Data Data Clear, Drying Feed

Printing Data

Stopping a printing operation halfway

Perform the following operation when stopping a printing operation halfway.

1	Press the	key during printing.	< L OCA L >
	• The printing operation stops.		w i d t h : 1 2 7 2mm

•Interrupt data sending at the PC side during the data is sent from the PC.

•Printing restarts from the interrupted data by repressing the key.

Deleting Received Data (Data Clear)

When you want to stop printing, delete the already received data.

1	Press the	key in LOCAL.	DA T A	C L E AR
				[ ENT ]
2	Press the	key.	* *	DA T A C L E AR * *
	• The ACTIVE lamp goes out.

• The received data is erased then it returns to the local mode.

Behavior after printing has been completed

Drying Feed

When printing has been completed, the feeding operation is performed to dry the printed surface with the drying heater.

•Perform the feeding operation until the back edge of printing passes the drying heater.

•When you press the key, the operation is terminated.

•When the machine has been received next data continuously, it will operate after the last data is received.

Screen display during drying feeding

D r y i n g ∗ ∗ : ∗ ∗ : ∗ ∗

2

Basic Operations

2-29