Ricoh L4160 Firmly fix the ink pack on the eco case with, Attach the cover, Attach the IC chip

Inserting ink cartridge

(2)Peel the seal of double coated tape.

3	Firmly fix the ink pack on the eco case with
	double coated tape so that it may not move.

•Fix the ink pack after pulling it so that the ink pack may not go slack.

• Fix the ink pack so that it may not be biased in the eco case.

Good example Bad example

The corner of the case	The ink pack has	The ink pack goes slack in
matches the ink pack	gone too far	spots.
corner.	downward.

4	Attach the cover.
	• Hang the claw on the IC ship side and then insert the cover

into the case.

5	Attach the IC chip.
	• Attach the IC chip as indicated in the photo.

• Attach it so that there is no gap in the part indicated with an arrow.

Bad example of attaching IC chip

No gap shall be found.

There is a gap.	The ins and the outs is	The back and the forth is
	reverse.	reverse.

1

Before Use

1-13