Ricoh L4130, L4160 Terminate air purge by pressing Key, Start pushing ink out, Close the port

7	Press the	key.
	• Start pushing ink out.

• Flow ink in the jig by 10cm.

• Flow ink from all ports of the damper selected in the Step 3.

A I R PG
COMP L E T ED	[ ENT ]

Ink

Reference value :

About 10cm

8	Terminate air purge by pressing the	key.
	• Close the port.

• When removing the jig, ink may leak. Put a paper towel etc. around the port.

CA PP I NG POS I T I ON

MOVE S T ART [ ENT ]

9	Press the	key.
	• The carriage returns to the cap position.

• Filling to the damper starts. Wait for a while until the amount of ink returns to the normal status.

• When filling has been completed, cleaning is performed.

• When ink filling into the damper has been completed, the screen returns to the one in the Step 2. For other dampers, perform the procedures from the Step 3 to 8.

P L E A SE WA I GT

* * C L EAN I NG * *

P L E A SE WA I GT

10 Press the key several times to end the setting.

5-8