Ricoh L4130, L4160 operation manual Filling the white ink

Filling the white ink

Turn on the power supply of the printer and fill white ink.

• When replacing the white ink filter, be sure to wear the attached goggles and the gloves. Ink may get in your eyes.

• Organic solvent is used for ink.

If it adheres to your skin or gets in your eyes, immediately wash off with water enough.

1	Turn ON the power of the printer.				< LOCA L >
	• Referring to P.2-3 “Turning the Power ON”, turn on the power
	supply.
2	Select [FILL UP INK] of the maintenance menu.
	(1) Press the		key in the Local.
	(2) Select [MAINTENANCE] by pressing the			keys then press the			key.
	(3) Select [FILL UP INK] by pressing the			keys.
3	Press the		key.		S E L EC T DAMP ER
					MMCC _ _ _ _
4	Press	to select damper [ _ _ _ _ YKWW].			S E L EC T	DAMP ER
					_ _ _ _ Y KWW
5	Press the		key.		A I R PG	V A L V E	OPEN
	• The screen to check air purge valve OPEN is displayed.				COMP L E T ED		[ ENT ]

6 Open the right maintenance cover.

Right maintenance cover

7	Open the air purge valve.
	• Using a flat-blade screwdriver, rotate the air purge valve so
	that the slot of it may be horizontal.
	Air purge valve
	Make the slot
	horizontal.
8	Close the right maintenance cover.

4-38