Ricoh L4130, L4160 Starting a Printing Operation, Setting a Media Checking the Heater Temperature

Starting a Printing Operation

• When using a roll media, rewind the media by hand before printing so that it is not loose.When the roll media has not been rewound tightly, it may cause the image quality to deteriorate.

•When making a test print, printing the actual image data is recommended. Depending on the image data, you may not be able to achieve the desired image quality.

1 Setting a Media ( P.2-5)

2	Checking the Heater Temperature
	• Check the CONSTANT lamp lights in [PRE], [PRINT], and

[POST] below the display.

3	Press the	key in LOCAL.
	• If the heater temperature has not reached the setting value, the
	right screen is displayed.
	Even if it has not reached, you can move to REMOTE when
	pressing the	key.
	• The screen changes to REMOTE, and data can be received from
	the PC.

T EMPERA TURE CONTROL !

P L E A SE WA I T

4	Transmit data to be printed from the PC.
	• The ACTIVE lamp blinks and the printing conditions are

displayed.

• For the method of data transmission, see the instruction manual for the output software.

5 Start printing.

Resolution

With/ without nozzle recovery setting

* REMOT E * 1 2 0 0 x 1 2 0 0 R . ..

The length of media drawn

Scanning speed x1 : Standard

speed x2 : Double speed

Data type

VD : Variable data

ND : Normal data

Scan direction

Ud : Unidirectional

Bd : Bidirectional

Number of passes

2-28