Ricoh L4130, L4160 operation manual About the ink that can be used with this machine

About the ink that can be used with this machine

The following three types of ink sets can be used with this machine: 4 color, 6 color, and 6 color+white versions

•4-color version: 2 each of Cyan, Magenta, Yellow and Black ink cartridges are used.

•6-color version: 1 each of Yellow, Orange, Green, and Black, 2 each of Cyan and Magenta ink cartridges are used.

•6-color+white version: 1 each of Cyan, Magenta, Yellow, Orange, Green and Black, and 2 White ink cartridges are used.

White ink is fed from an ink cartridge, but the inks for Cyan, Magenta, Yellow, Orange, Green and Black are supplied from an ink-pack. Set the inks in the eco case before you set the ink cartridge. Also, the white ink is contained in a eco cartridge that is shorter in length than the cartridge of Cyan, Magenta, Yellow, Orange, Green and Black inks.

1	Slowly shake the white ink cartridge more than twenty times right and left.
	• To prevent ink from leaking when you shake the Eco-cartridge, wear gloves and firmly cover the A part

of the upper surface of the cartridge and the B part of the bottom surface of the Eco-cartridge with paper towels. Then, shake it more than twenty times right and left so that ink flows inside the cartridge.

• If you shake it too strong, the pack inside may be damaged and it may cause ink leakage. Therefore, perform this carefully.

• If the remaining amount of ink is less, ink in the Eco-cartridge cannot be beaten enough. Tilt the cartridge until it becomes vertical.

• When you use white ink:	SHA K E WH I T E	I NK
When 24 hours have passed with the power supply
	CAR T R I DGE S	[ EN T ]
is ON, or, when the power supply is ON, the

message is displayed.

As the component of white ink is easy to settle out, it is necessary to shake it periodically.

A	part	B part
(the place to stick a needle)		(the slot on the bottom)

Repeat this

A part Cover with paper towel firmly

and shake ink slowly

1-14