Manuals / Ricoh / Computer Equipment / Printer

Ricoh L4160, L4130 operation manual Names of Parts and Functions, Front Side of the Machine

Models: L4160 L4130

1 174

Download 174 pages 34.29 Kb

Page 21

Names of Parts and Functions

Front Side of the Machine

Left maintenance cover	Front cover
Open the cover in maintenance.	Open the cover in setting of medias, taking of measures
Even when the power switch is off, keep all covers	against jamming of medias or in maintenance inside the
closed.	station.
	Even when the power switch is off, keep this cover and
	the other covers closed.

Ink cartridge setting section

Set the ink cartridge for each color.

Take-up device

Take up the output drawn with a roll medium automatically.

Drying heater

The dryer blows warm air on the printed paper to fix and dry ink.

Maintenance cover (upper right)

Open this cover when performing maintenance on the print head and the surrounding parts.

Maintenance cover (lower right)

Open this cover when performing maintenance on the print head and the surrounding parts.

Operation panel

This panel has the operation keys required for operating the machine and the LCDs for displaying setting items, etc.

Power switch*1

Turns on/off the power to the machine.

Waste ink bottle

Waste ink gathers in this bottle.

1

Before Use

	Clamp lever (front)	Stand
	Clamp lever (front)	Supports the main body of the machine. It is
	Moves the pinch rollers up and down to hold or	Supports the main body of the machine. It is
	Moves the pinch rollers up and down to hold or	provided with casters that are used to move
	release the media.	this machine.

Media Transfer Surface

Print media is retained and transferred along the media transfer surface by vacuum. Three heaters are installed inside the media transfer surface.

Print heater/ Post-heater

Fixes and dries the ink on the currently produced print. (Located inside the Media Transfer Surface)

Electrostatic sheet

Prevents the media from sticking to the Media Transfer Surface due to static.

*1 : The power switch under the operation panel lights in green when the power is turned on. The ink clogging prevention function is periodically operated even when the power switch is OFF if the main power switch keeps being ON. (Auto maintenance function) P.1-4

1-3

Image 21

Ricoh L4160, L4130 operation manual Names of Parts and Functions, Front Side of the Machine

Contents

This manual contains detailed instructions and notes on Table of Contents Chapter Extended Functions Chapter Basic OperationsIii Chapter MaintenanceChapter Appendix Chapter TroubleshootingIntroduction InformationAll Other Users Disclaimer of WarrantyVii For Users in IndiaFor Turkey only Viii Declaration of ConformityExamples of symbols Safety PrecautionsHazardous Moving Parts Safety PrecautionsHandling of the power cable Power supply Handling of inkHeater Xii Xiii Xiv Safety interlock Xvi Burn injury may result XviiThis chapter Chapter Before UseWorking Environmental Temperature Where to Install This MachineModel Width Depth Height Gross weight Moving This MachineFront Side of the Machine Names of Parts and FunctionsRear Side and Right Side of the Machine Operation Panel Signs on the power switchMedia sensor HeaterCutter blade and slot for cutting CarriageCapping station Pinch rollers and Feed rollers Connecting Cables Connecting USB2.0 Interface CableYour RIP must be compatible with USB Connecting the power cable Inserting ink cartridge How to assemble ink cartridgeOpen the cover of the eco cartridge Set the ink pack on the eco caseDouble coated tape so that it may not move Firmly fix the ink pack on the eco case withAttach the cover Attach the IC chipAbout the ink that can be used with this machine Insert the ink cartridge Setting orders of ink cartridgesFor Ink cartridge lamps Changing an ink cartridgeAbout ink expiration date About cartridge ink end and ink near endBefore Use Usable sizes of media MediaAbout antistatic sheet Fix the electrostatic sheetRemove the electrostatic sheet About antistatic sheet Chapter Basic Operations Workflow Turning the Power on Turning the Power ON/OFFTurning the Power OFF Adjusting the Head Height Setting a MediaMove the carriage to the Media Transfer Surface Loosen two screws located at the frontFix the carriage Return the carriage to the station positionClose the front cover Setting a Media Setting a roll media Insert the roll media in this machine Tighten the roll holder fixing screwPull out the roll media out Make the roll media even then lower the clamp leverHold the media with the media press gently Hold the media with the media guide gently Prepare for the take-up devicePress Key to select Roll Fix the media on the take-up device. P.2-13 Entering the media remaining amountDisplay Screen For entering media remaining Amount Press Key to enter the media remainingTake-up device Setting the torque limiterPush down the clamp lever Setting leaf mediaMedia detection is started Close the front cover Press Key Key to select LeafChanging the printing origin Typical setting position of printing originLocal, Press After determining the origin, press KeyPress To set the temperature Each heater Changing the Temperature Settings for the HeatersPress Key to end the setting Preparing for the HeatersChanging the Temperature Settings for the Drying Heater Checking the Heater TemperaturePress Key at the end of confirmation Press Key three timesPress Key in Local three Test FeedingTimes Press Key Press To select ON/OFFRelationship between head row and test pattern Test PrintingPress Key in Local Test PrintingCheck the printed test pattern Check before testHead Cleaning About head cleaningPerform head cleaning depending on the test printing result Set the media feeding Setting Feed CorrectionSet a media Press Key to print a correction patternPress Key several times to end the setting Performing the station maintenance without keyCorrecting Media-feeding during Printing Press Key in the RemoteExample of a Drop Position correct Printed Pattern Press To select the resolutionPress Key to start pattern printing Press To correct the dot position of PatternPerforming to correct the dot position without key Next test pattern is printedRepeat Printing Data Checking the Status of Ink CartridgesChecking the Status of Waste Ink Bottle Starting a Printing Operation Setting a Media Checking the Heater TemperatureTransmit data to be printed from the PC Start printingDeleting Received Data Data Clear Stopping a printing operation halfwayBehavior after printing has been completed Drying FeedWhen INK END error occurs while printing When Near END error occurs while printingCutting a media Press To specify the cutting positionPrinting Data Page Chapter Extended Functions About default Host function Function name Set value DefaultList of Functions When you set this to on or Host Setting Logical SeekMovement of heads when Logical seek is OFF Movement of heads when Logical seek is onSetting Drying Time Press To select Drying TimePress To set drying time for scanning Press To select Margin Setting MarginsPress To set the left margins Press To set the right marginsPress To select Maps Press To set ON/OFFPress To change print speed Press To select Auto Cleaning Setting Auto CleaningPress To set a cleaning interval Press To set a cleaning typePress To select types Press To select Interval WipingPress Key To set levels, and press Press To set intervals, and press KeyPress To select an item for setting Other SettingsPress Key To select the setting value Set value is retained even when the power is turned OFFSet value Default Meaning Machine SettingsPress To select Machine Setup Setting a Auto Power-offPress To set time to turn OFF the power Press Key twicePress To select Media Remain Setting the Display of Media ResidualDisplay is turned to on Display is turned to OFFLOCAL, Press Printing the Remaining Amount of a MediaPress To select Time Setting TimePress To enter time Year/Month/Day/Time selectingbySetting Units Setting a KEY Buzzer Key several times to end the settingPress To select KEY Buzzer Press To select Language Setting a LanguageInitializing the Settings Already configured settings are initializedInitial setting screed is displayed. LANGUAGE/TIME Displaying the Information Confirming Machine InformationPress To select Information Press To select UsageFILTERwhite Print Length Print AreaDisplaying the Information of this machine Check such as the machine version informationPress To select a type of information Information is displayed sequentially with KeyPage Chapter Maintenance Maintenance Precautions for MaintenanceAbout Cleaning Fluid Cleaning the Exterior Surfaces Cleaning the Media Transfer SurfaceCleaning of after heater cover and pre heater cover Cleaning the Media Holder Cleaning the Media SensorBackside of the machine Media sensorPress MAINT. key in Local Cleaning the Wiper and CapPress To select Station Maint Station.Otherwise, you may get ink in your eyesRemove the wiper Open the right maintenance cover cover thenKimwipe Take out the wiper and remove ink blot etc. with aClean the area around the wiper Clean the wiper sliderSet the wiper at the original position Space between the wiper slider and ink guard WWashing the Ink Discharge Passage Disway Wash Performing the station maintenance without MAINT. keyOpen the right maintenance cover When the Machine Is Not Used for a Long Time Custody WashClose the right maintenance cover and press Fill up the cap with Cleaning Fluid for maintenance．Press To select Custody Wash Clean the wiper and the bracketCarriage moves onto the Media Transfer Surface Clean the area around the wiperClose the right maintenance cover and press Key Press To set the time for the Cleaning FluidFill up the cap with Cleaning Fluid for maintenance ． To be left as it isOpen the left maintenance cover Close the left maintenance cover then press Cleaning the Head and the Area around It every dayInsert a new absorber Open the rght maintenance cover then Remove the absorberAfter its initial operation, the machine returns to Close the right maintenance cover then press KeyWashing of Head nozzle Press To select Nozzle WashWashing nozzle surface Cap rubber. Wipe off so that Cleaning Fluid for Close the right maintenance cover then press Fill up the cap with Cleaning Fluid for Maintenance ．Press To select Head Maint Washing nozzle surfaceClose the left maintenance cover then press Key Immerse Wiper for CR in Maintenance kitPerform head cleaning Perform test printing Wipe the nozzle surface from the rear of the mainSelect the Nozzle line that needs Nozzle Recovery Select Nozzle Recovery of the maintenance menuSelect the Print by pressing Key. Then Press By pressing Key. Then pressRecovery State Recovery and then press KeySelect the Reset by pressing Key Reset the set valueSelect the Nozzle line that needs clear the setting Select the Check by pressing KeySelect Auto MAINT. of the maintenance menu Setting the Refreshing IntervalsPress To set the refreshing interval Function name DescriptionsPress To select Cleaning Setting the Cleaning IntervalsCleaning operation Press To select a cleaning typeCleaning type selection screen appears Press To select CLEANINGWhitePress To set the interval between each Set value NORMAL, SOFT, HardReplacing consumables Open the rght maintenance cover then removeReplacing the wiper WiperConfirmation Message in Local If a Waste Ink Bottle Confirmation Message AppearsMessage on the right is displayed Check the state of the waste ink bottleReplace the waste ink bottle with another Close the waste ink bottle guard Press Key Press the Maint Key in Local Replacing the Cutter BladeScrew Replace the cutter unit by the carriageCutter unit Screen returns toReplacing the white ink filter When white ink filter becomes required to be replacedWhen white ink filter replacing time message is displayed Replace the white ink filter Open the W filter maintenance cover Turn OFF the power of the printerAttach the W filter maintenance cover Replacing the white ink filterFilling the white ink Display Press Key and show Damper SelectPress Key and select the damper YkwwClose the right maintenance cover Press Key Press Key and perform air purgeInk Clearing white ink filter used days Select Usage of the maintenance menuPress Key five times, display the used Number of days of Filter WhitePage Chapter Troubleshooting Power does not turn on TroubleshootingMachine does not start printing YesIs a recommended media used ? Media get jammed / media is soiledImage quality is poor Heat or Constant LED does not light upPhenomenon Measures Colors in the printed image appearNozzle is clogged Ink cartridge warning appearsDisplaying the description of ink cartridge trouble When Error 618 to 61b occur Select Damper of the maintenance menuSelect the damper to maintenance Select AIR PG of the maintenance menu When nozzle missing occurs due to ink mixture or aerationStart air purge by pressing Key Select the damper to air purgeTerminate air purge by pressing Key Start pushing ink outClose the port Select White MAINT. of the maintenance menu Regular maintenance of white inkWhen the feeding media is loosened and reached to the floor When media heaves up at feedingMedia feeding Ing statusMessage displayed in Local Errors when performing operationsBeen nearly used up Ink Error Error messages 3VB power supply Media jam occurs Remove the media and reset it System Halt Page Chapter Appendix Machine specifications SpecificationsSpecifications Ink specificationsProduct name Product code List of consumablesSheet for inquiry To P.6-8 Function FlowchartFunction Flowchart From P.6-6 When there is no recovery, it is not displayed Setup Maintenance Machine SET S T I N T S T a R T To P.6-12 To P.6-16 To P.6-20Setup Print end From P.6-12 Displayed when Manual is set To P.6-18 To Local after initializing Displayed on CleaningFrom P.6-16 P E Norma L NE S E T U P Function Flowchart EN GB EN US EN AU