NCD ThinSTAR 300 Basics
The Citrix ICA Connection Wizard
If the Citrix ICA Connection Wizard displays, you must create a Network or Dial-In ICA Client connection to a Citrix WinFrame or Terminal Server MetaFrame server using the name or network address of the host (server computer). As with other connections, you can configure the automatic start-up of an application or a published application (ICA connections only). A published application is one which your system administrator has named and configured to be available to everyone on the network.
Figure 1-3 Citrix ICA Connection Wizard
To create a connection:
1.Begin by selecting the connection type, either a Network Connection, or a Dial-In Connection. If you select a Dial-In Connection, the next page asks for the phone number of the modem to which you wish to connect. The remaining pages are the same as for a Network Connection. Click Next.
2.In the next page select a Citrix server or Published Application for your connection. If you select Published Application you must use one that is listed, if no published applications are listed, select a Citrix Server instead. Click Next
1-8 | NCD ThinSTAR 300 User’s Guide |
