NCDThinSTAR 300 Basics
NCD ThinSTAR 300 User’s Guide 1-11
Switching the Terminal to LAN Mode
You can put the terminal back into LAN mode with the
Terminal Properties > Management tab > Network
Optionspanel. The terminal restarts for the setting to take
effect.
In LAN mode, dial-up connections display in the
Connection Manger but cannot be activated.
Using the Connection Manager
The NCD ThinSTAR 300 Connection Manager lists all
defined connections to Terminals Servers as well as all
defined dial-up connections. Active connections are
indicated in the Status column.
To display theNCD ThinSTAR Connection Manager,
press CTRL+ALT+END.
Figure 1-5 NCD ThinSTAR Connection Manager