Network Computing Devices 300 manual Configuring Connections, Advanced Users Configuration Notes

Advanced Users Configuration Notes

Configuring Connections

Table A-1 Connection Manager Tasks

Task	Action
Displaying the	Press CTRL+ALT+END.
NCD ThinSTAR	Note By default the NCD
Connection	ThinSTAR Connection
Manager	Manager displays two
	tabs: Connections and
	Configure. If the
	Configure tab does not
	display, see your system
	administrator.
Viewing active	Display the Connections tab of the NCD
connections	ThinSTAR Connection Manager.
Ending	❏ On the Windows NT desktop, select
connections	Start > Disconnect. This logs you off
	and ends the connection. Any open
	applications are suspended and your
	data retained until you log on again.
	❏ On the Windows NT desktop, select
	Start > Logoff. This closes any open
	applications, then logs you off and
	ends the connection.
	❏ In the WinFrame Program Manager,
	select File > Logoff or File >
	Disconnect.
	❏ On the Connections tab of the NCD
	ThinSTAR Connection Manager, select
	the connection you want to end and
	click End. The connection terminates,
	with the same effect as disconnecting;
	all running applications are left active.
	Use this only if other methods do not
	work.

A-2 NCD ThinSTAR 300 User’s Guide