AdvancedUsers Configuration Notes
NCD ThinSTAR 300 User’s Guide A-5
Task Action
Modifying
Microsoft
terminal client
connections —
changing
Network
Connection
properties
On the Configure tab, select the
connection you want to modify. Display
the Properties panel by clickingEdit.
Use the Net Connections tab to change
the following attributes:
❏Name: a description for the connection
❏Server: the IP address or the name of
the Terminal Server host
❏User Name: depending on what you
enter for the Domain:
— User ID of a local account set up on
a particular Terminal Server host.
— User ID of a global account set up
on a Domain Controller.
❏Password: The password associated
with the user ID specified above.
❏Domain:
— If the Terminal Server host belongs
toa Windows NT domain, and you
want users authenticated by the
Primary Domain Controller, enter
the Windows NT domain name.
— If the Terminal Server is not a
memberof a Windows NT domain
and/or you want users
authenticated locally on that
server, enter the name of the
Terminal Server.
❏Low speed connection: If the physical
connection to the Terminal Server is
througha low bandwidth line (WAN or
serial), rather than over an ethernet
cable, check this box.
Table A-1 Connection Manager Tasks