RAIN CAP
24" min. |
|
(610 mm) | 36" TYP. |
| FLASHING |
RADIATION SHIELD
20 FT. MAX.
OUTSIDE AIR DUCT THROUGH FLOOR WHEN
MOBLE HOME IS NOT UNDERPENNED
RAIN CAP
24" min. |
|
(610 mm) | 36" TYP. |
FLASHING
RADIATION SHIELD |
OUTSIDE AIR DUCT THROUGH UNDERPENNED
Ceiling Exit (Using Close Clearance Listed Chimney)
1.Suspend a plumb bob from the ceiling above the unit so that the weight is hanging in the center of the flue exit. ( A small weight on a string will serve as a plumb bob.) Mark the ceiling where the string is suspended to locate the center of the chimney hole.
2.After locating the center of the hole install the connector, flashing and rain cap using listed manual.
ceiling support box, chimney or chimney chimney only. Only use pipe listed in this
3. Add additional pipe until both of the following are met:
27
