I LCD panel | Viewfinder | Shutter | |
Blinking Symbol | Blinking Symbol | ||
| |||
| ~ | Locked | |
• | (after flash |
| |
shooting) |
| ||
,- |
| ||
Err TTL | Locked | ||
(in P IS) |
|
|
About LCD
•The camera uses a Liquid Crystal Display (LCD) of the highest quality which, under conditions of normal use, should provide several years of reliable operation. After this period, contrast may deteriorate and display information may start to fade. You can have the LCD replaced at a nominal charge by contacting an authorised Nikon dealer or service facility.
Cause and Remedy
I
Light might be insufficient. Confirm shooting distance and, if necessary, move closer to the subject or select a wider aperture.
Speedlight attached is not set at TIL. Set the Speedlight'sflash mode to TIL. Or, use Aperture- Priority Auto or Manual exposure mode.
•At temperatures between freezing, the LCD's response time slows down; it goes back to normal when the temperature rises.
•As the temperature rises, the LCD turns reddish; as the temperature drops, the LCD turns bluish. These changes do not affect normal use.
70
