Nikon V1 manual Storage and Cleaning, Lens, Monitor

Storage and Cleaning

Storage

If the camera will not be used for an extended period, remove the battery and store it in a cool, dry area with the terminal cover in place. To prevent mold or mildew, store the camera in a dry, well-ventilated area. Do not store your camera with naphtha or camphor moth balls or in locations that:

•are poorly ventilated or subject to humidities of over 60%

•are next to equipment that produces strong electromagnetic fields, such as televisions or radios

•are exposed to temperatures above 50 °C (122 °F) or below –10 °C (14 °F)

Cleaning

	Use a blower to remove dust and lint, then wipe gently with
	a soft, dry cloth. After using the camera at the beach or sea-
Camera body	side, wipe off sand or salt with a cloth lightly dampened in
	distilled water and dry thoroughly. Important: Dust or other
	foreign matter inside the camera may cause damage not cov-
	ered under warranty.
	These elements are easily damaged. Remove dust and lint
Lens,	with a blower. If using an aerosol blower, keep the can ver-
	tical to prevent the discharge of liquid. To remove finger-
viewfinder
	prints and other stains, apply a small amount of lens cleaner
	to a soft cloth and clean with care.
	Remove dust and lint with a blower. When removing finger-
Monitor	prints and other stains, wipe the surface lightly with a soft
	cloth or chamois leather. Do not apply pressure, as this
	could result in damage or malfunction.

Do not use alcohol, thinner, or other volatile chemicals.

n

168