Nikon V1 manual Load from/Save to Card, 137, ACopy to Card

Load from/Save to Card

Custom Picture Controls created using the Picture Control Utility available with ViewNX 2 or optional software such as Capture NX 2 can be copied to a memory card and loaded into the camera, or custom Picture Controls created with the camera can be copied to the memory card to be used in other Nikon 1 V1 cameras and compatible software and then deleted when no longer needed.

To copy custom Picture Controls to or from the memory card, or to delete custom Picture Controls from the memory card, select Load from/save to card in the Custom Picture Control menu. The following options will be displayed:

Copy to camera	Copy custom Picture Controls from the memory card to
	custom Picture Controls C-1 through C-9.
	Delete selected custom Picture
	Controls from the memory
	card. The confirmation dialog
Delete from card	shown at right will be dis-
	played before a Picture Control
	is deleted; to delete the
	selected Picture Control, high-
	light Yes and press J.
Copy to card	Copy a custom Picture Control (C-1 through C-9) to a
	selected destination (1 through 99) on the memory card.

ACopy to Card

Up to 99 custom Picture Controls can be stored on the memory card at any one time. The memory card can only be used to store user-created custom Picture Controls. The preset Picture Controls supplied with the camera can not be copied to the memory card or deleted.

ACustom Picture Control > Delete

The Delete option in the Custom Picture Control menu can be used to delete selected custom Picture Controls when they are no longer needed.

i

137