Nikon V1 AThe Flash/Capture-Illuminator Status Indicators, Graph is taken, Blinks once a second

t

AOptional Flash Units

Flash units other than the SB-N5 can not be used. Detailed instructions may be found in the manual provided with the flash unit. Objects close to the camera may be overexposed at high ISO sensitivities.

AThe Flash/Capture-Illuminator Status Indicators

If the flash status or capture-illuminator status indicator on the rear of the flash unit blinks, one of the following errors may have occurred:

Display	Description
	The flash has fired at full power and
The flash status indicator blinks for	the photograph may be underex-
about three seconds after a photo-	posed. Try reducing the distance to
graph is taken.	the subject or increasing ISO sensi-
	tivity (0 131).
	Continuous use has caused the tem-
The flash or capture status indicator	perature of the flash unit to rise and
	the unit has been disabled to protect
blinks once a second.	the flash. Turn the unit off and wait
	for it to cool.
The flash and capture status indicators	A data transfer error has occurred.
	Check that the flash unit is correctly
blink once every two seconds.	attached.
	An error has occurred in the unit’s
	internal circuitry. Turn the camera
The flash status indicator blinks eight	off, remove the flash unit, and take
times a second.	the camera and flash unit to a Nikon-
	authorized service center for consul-
	tation.

60