ENGLISH

USER MANUAL

MAIN BROOM HEIGHT CHECK AND ADJUSTMENT

NOTE

Brooms with harder or softer bristles are available. This procedure is applicable to all types of brooms.

1.Check the main broom distance from the ground as shown below:

Drive the machine on a level floor.

Keep the machine stationary and turn on the main broom for a few seconds.

Stop the main broom, then move the machine and turn it off.

Check that the main broom print (A, Fig. 4), along its length, is 2 to 4 cm wide.

If the print (A, Fig. 4) is not within specifications, adjust the broom height as shown in step 2.

2.Make sure that the machine cannot move independently; if equipped, press the pedal brake (26).

3.Turn the ignition key (71) to "0".

4.Loosen the knobs (A, Fig. 5) on both sides of the machine.

5.On both sides of the machine, loosen the knobs (A, Fig. 5) and move the main broom height variation indicator (B) as necessary, then tighten the knobs (A).

NOTE

The indicator (B, Fig. 5) must be in the same position on both sides of the machine; the maximum difference allowed to obtain the print (A, Fig. 4) shown in step 1 (2 - 4 cm wide) is two notches.

6.Perform step 1 again to check that the main broom is at the correct distance from the ground.

7.When the broom is too worn to be adjusted, replace it as shown in the next paragraph.

CAUTION!

If the main broom print is excessive (larger than 4 cm), the machine regular operation is affected and the moving or electrical parts can overheat, thus reducing machine life.

Pay careful attention when performing the above-mentioned checks, and always use the machine according to the indicated conditions.

S311457

S311458

Figure 4

Figure 5

14

146 0676 000(5)2007-06 A

SW 700S P

Page 56
Image 56
Nilfisk-Advance America SW 700S P manuel dutilisation Main Broom Height Check and Adjustment

SW 700S P specifications

The Nilfisk-Advance America SW 700S P is an innovative and efficient machine that stands out in the realm of commercial cleaning equipment. Designed for optimal performance and user convenience, the SW 700S P combines state-of-the-art technology with robust features aimed at streamlining the cleaning process in a variety of industrial and commercial settings.

One of the standout features of the SW 700S P is its compact design, which allows for excellent maneuverability in tight spaces. This is particularly beneficial in environments such as retail stores, schools, and warehouses where space can often be limited. The machine’s low profile ensures that it can easily navigate around obstacles, providing thorough cleaning without disrupting daily operations.

Equipped with a powerful yet efficient motor, the SW 700S P delivers impressive cleaning capabilities. It utilizes a dual-suction system that maximizes dirt and debris pickup, ensuring a consistently clean surface. This technology not only enhances cleaning efficiency but also minimizes the need for frequent emptying of the waste container, allowing operators to focus on their tasks without interruption.

The machine incorporates user-friendly controls, making it accessible for operators of all experience levels. The ergonomic design features an adjustable handle that ensures comfort during prolonged use. Additionally, operators can easily switch between cleaning modes, optimizing the machine for various floor types and levels of dirt accumulation.

Another noteworthy technology is the integrated battery system that provides a sustainable power source, reducing the environmental footprint of the cleaning process. The SW 700S P features rapid charging capabilities, ensuring that it can be fully recharged and ready for use in minimal time, thus maximizing productivity throughout the day.

Maintenance is simplified with the SW 700S P, as daily upkeep can be performed quickly and efficiently. The machine features easily accessible components, allowing users to conduct routine inspections and cleaning with minimal effort. This not only extends the life of the equipment but also ensures consistent performance.

In summary, the Nilfisk-Advance America SW 700S P is a pioneering cleaning solution that combines versatility, efficiency, and ease of use. Its advanced features and technologies make it an invaluable asset for businesses looking to maintain cleanliness and hygiene standards while promoting operational efficiency.