Nilfisk-Advance America SW 700S P Skirt Height Check And Adjustment, Side skirt check, English

ENGLISH

USER MANUAL

SKIRT HEIGHT CHECK AND ADJUSTMENT

1.Drive the machine on a level floor that is suitable for checking the skirt height. Make sure that the machine cannot move independently; if equipped, press the pedal brake (26).

2.Turn the ignition key (71) to "0".

Side skirt check

3.Check the side skirts (13 and 14) for integrity.

Replace the skirts when they have cuts (A, Fig. 15) larger than 20 mm or cracks/tears (B) larger than 10 mm (for skirt replacement, refer to the Service Manual).

4.Check that distance from the ground of the side skirts (13 and 14) is within 0 – 3 mm (A, Fig. 16). If necessary, adjust the skirt height according to the following procedure.

S311468

Figure 15

S311469	S311470
Figure 16	Figure 17

18

146 0676 000(5)2007-06 A

SW 700S P