Nortel Networks 4400, RELEASE 4.1 manual Passport 4400 Install

Chapter 1 Introduction 15

This chart will help you decide which device management tool is best suited for your needs.

	Workstation		For More
Tool	you will	When To Use It
			Information
	need:
Install Tool	Windows-	Use Install Tool to set up a	Refer to the Using
	based PC	factory-new or factory-defaulted	Passport 4400 Install
		Passport 4460 unit, such that	Tool Version 4.1,
		network connectivity and basic	206906-B.
		services are enabled. In addition,
		you can use Install Tool to perform
		real-time monitoring of Passport
		4400 units in your network.
Passport 4400	Any	Use the Configurator to perform	Refer to the
Configurator	workstation	any Passport 4460 configuration	Configuring and
	that supports	task.	Operating
	a browser	Note 1: The Passport 4400	Passport 4400
	(Internet		Software, 206916-A
		Configurator is an embedded web
	Explorer or		(online
		interface. It is a built-in component
	Netscape)	of Passport 4460 units.	documentation).
		Note 2: To access the Passport
		4400 Configurator from within
		Install Tool, select Web
		Configurator from the System
		menu.
		Note 3: Like Install Tool, the
		Passport 4400 Configurator can
		access the Passport 4460 unit
		through PPP IP connectivity.
Command Line	Dumb	Use the CLI to perform any	Refer to the
Interface (CLI)	terminal or	configuration task, especially	Passport 4400
	terminal	low-level or specialized tasks.	Reference for CLI,
	emulation		209666-A.
	software
Mass	Windows-	Use the Mass Deployment and	Refer to the Using
Deployment	based PC	Reporting Tool to generate	the Passport 4400
and Reporting		configuration reports and to	Mass Deployment
Tool (MDT)		replicate the configuration of one	and Reporting Tool,
		unit to multiple units.	209665-A

Getting Started with Passport 4400, Release 4.1