52Chapter 6 CLI Procedure for Creating a Node Profile
Defining a Node Name
To define a node name, use the following CLI command:
CLI> set system administration NodeName
Parameter | Range of Values | Required Action |
<NodeName> | “String” (1..50) |
Enter the node name to be assigned to this Passport 4460 unit. The string must be enclosed within quotation marks.
Example:
CLI> set system administration NodeName “456543”
If you don’t want to modify any more parameters in this window, you must save and reset the system before the new configuration takes effect. Go to “Saving the Current Configuration and Resetting the Unit” on page 54.
If your Passport 4460 is part of a larger Passport network, you may want to define a Node ID and Customer ID for network management purposes. Continue with these steps:
