36Chapter 4 Configurator Procedure for Creating a Node Profile
Defining a Node ID
To define a Node ID, enter the node ID in the Node ID field. Enter an integer between 1 and 65535 (for example, 23). If your network uses node IDs to identify Passport 4400 units, be sure to assign each unit a unique node ID.
If you don’t want to modify any more parameters in this window, click Save. A “Command Successful” appears. If you are done, you must reset the system before the new configuration takes effect. Go to “Resetting the Unit” on page 37, or continue with “Defining a Customer ID” on page 37.
