Nortel Networks 4400, RELEASE 4.1 manual Appendix B Installing System Software from the CD-ROM

65

Appendix B

Installing System Software from the CD-ROM

For software installation for Install Tool, refer to Using Passport 4400 Install Tool Version 4.1, 206906-B.

For software installation for the Mass Deployment and Reporting Tool, refer to Using the Passport 4400 Mass Deployment and Reporting Tool, 209665-A

For software installation for the system software from the CD-ROM, follow these steps:

1Place the CD into the drive

2From the D: drive (where D: is your CD-ROM drive) icon on your screen double click on the CD icon

3Double click on software

Application Code

The application code is installed on your Passport 4460 unit as you download the application software.

The Passport 4460 application software is a single file (pr41xxxx.bld) supplied in a “bld” format consisting of the following executable images:

•Ethernet Base Module code (PR4_1_0.CMP and IO4_1_0.CMP)

•DSP code for voice (dspc54xx.voc)

•Code for the Passport 4400 Configurator (HTML.CMP)

Getting Started with Passport 4400, Release 4.1