Nortel Networks 4400, RELEASE 4.1 manual CLI Procedure for Downloading Application Software

Appendix B Installing System Software from the CD-ROM 69

CLI Procedure for Downloading Application Software

1Load the Passport 4460 Release 4.1 software onto your TFTP server (boot and application code as required).

2Access the CLI (it may be necessary to do this through a Telnet session).

3Download the boot code (if necessary). Otherwise, skip this step. Example:

Download base image specific 192.168.15.30 “bt41xxxx.bld”. This will download the file bt41xxxx.bld from the TFTP host with the IP address 192.168.15.30 (where x’s represent the current version/filename).

4Download the Release 4.1 application code onto the Passport 4460 unit using TFTP.

a Commit the application code bank that will be write-protected during the download

Example:

CLI> set system firmware commitcodebank bank 1

This will write-protect application code bank 1. The application code will be downloaded into bank 2.

bDownload the application code, Example:

CLI> download base image specific 192.168.15.30 “pr41xxxx.bld”

This command downloads the file pr41xxxx.bld from the TFTP host whose IP address is 192.168.15.30 (where x’s represent the current version/filename).

5Commit the new application software to the write-protected bank. Example:

CLI> set system firmware commitcodebank bank2

Getting Started with Passport 4400, Release 4.1