60Appendix A IfIndexes and Interface Identification

IfIndex Table Display Description

You can display a list of all IfIndexes currently assigned to interfaces on the Passport 4460. Go to:

“Configurator Procedure for Displaying the IfIndex Table” on page 60

“CLI Procedure for Displaying the IfIndex Table” on page 61

“IfIndex Overview” on page 57

“Hard-Coded IfIndexes” on page 58

“Reserved IfIndexes and Ranges” on page 58

Configurator Procedure for Displaying the IfIndex Table

To display IfIndexes through Configurator:

1Click on Status/Statistics.

2Click on All Interfaces. You will see the Interface Status/Statistics window. Below is a partial display of the IfIndex Table using Configurator.

3See “IfIndex Table Display Definitions” on page 62 for a description of the above parameters.

209664-A

Page 60
Image 60
Nortel Networks 4400, RELEASE 4.1 manual IfIndex Table Display Description