Chapter 6: Reports
This section is used to enable Console.NET user(s) and configure their options as well as set some security options for specific extensions. Extension numbers & names are initially imported as they are programmed on the telephone system(s). Names can be changed within Console.NET but will have no bearing on the names as displayed on the telephones themselves. If you do not want to see all extensions in Console.NET, Do NOT delete them from here. If only specific extensions are to be viewed, set them in a group as described later in this section.
NOTE: (Norstar Systems only)
It is important that a Directory Number discovery is initially performed using PBX wizard. Extensions added to the phone system at a later date must be manually updated in Directory Number configuration or a discovery must be
Creating Users
Console.NET users can be created using the PBX wizard or manually within Console.NET "Directory Number Configuration". For manual configuration simply assign a password to the extension(s) you wish to designate as the Console.NET user.
•Click on the Config button in the upper right area of the main Console.NET window
•Select Directory Numbers then Configuration from the top left side of the Configuration window
•If more than one system is connected, select the proper "Switch Name" that the required user is a member of
•Click on the Drop down arrow located on the right side of the "Full Name" field to display a list of all extensions
•Select the extension that you wish to designate as a user
•Enter a password in the "Password" field and save the changes. Passwords are often entered using the same number as the extension number
Current Switch Name
•When more than one BCM or Norstar system is connected, you must select the system containing the extension(s) you wish to configure as a User. Click on the drop down arrow from the right side of the field to display all systems
Page 33
