Nortel Networks ICS 6.1 Dest codes, Show DstCode, DestCode, AbsorbLength, First route, Evening

92

•• Dest codes	Define which routes are used when a destination code is dialed.
••• Show DstCode:_	Up to 500 destination codes are programmable.
	Enter up to seven digits of the destination code that you want to use to define
	a route.
	Destination codes must be unique.
	A destination code cannot begin with a digit assigned as:
	• Call Park prefix
	• Direct-dial digit
	• same as, or be the start digits of a DN, the DISA DN or the Auto DN
	• line pool code
	• received number.
••• DestCode:_	Enter the new destination code.
••• DestCode:	Shows the destination code you wish to view.
•••• Normal	For the last destination code, define the normal service. Use the route that
	has the lowest cost for the times when normal service is in use.
••••• AbsorbLength	Enter the number of digits from the destination code that will be dropped
	before the number is dialed out.
•••• Night	Each of the next six schedules allow you to define three possible routes that
	an outgoing call may take.
••••• First route	Enter route numbers and determine the amount of the destination code that
••••• Absorb Length	needs to be suppressed to use these routes.
	The routes are listed in hierarchal order. The system attempts the first route,
••••• Second route
	first, and only moves to the second route if the first route is not available. If
••••• Absorb Length	the second route is also not available, the call will attempt to use the third
••••• Third route	route. If none of the routes are available, the call will go to the overflow route,
	if one has been specified.
••••• Absorb Length
•••• Evening	For the last destination code, define a route for each of the schedules that you
•••• Lunch	want to activate for this code.
•••• Sched 4
•••• Sched 5
•••• Sched 6
•• Sched:Night	This schedule can be activated automatically or manually, or it can be left in
	the default Off.
••• Service	Select how you want this service activated, if applicable.
••• Overflow	For each schedule, choose whether you want a destination code to use the
	route assigned to normal service when the route assigned to the schedule is
	busy.
•• Sched:Evening	Select how you want each of the scheduled services to be activated, and
•• Sched:Lunch	whether a destination code uses the route used with normal service when the
	route used with the schedule is busy.
•• Sched:Sched 4
•• Sched:Sched 5
•• Sched:Sched 6

Modular ICS 6.1 Programming Record P0603536 02