Nortel Networks ICS 6.1 Terminals & Sets, Show set, Line access, Line assignment, Show line, Oli#

82

Use the following commands to change defaults and configure the lines and sets to suit your system requirements. Use Installer or Administrator access codes.

Terminals & Sets	These commands allow you to assign settings to each telephone (DN).
• Show set:_	Enter the DN of the telephone you want to program.
• XXXX:XXXX	DN number and current name displays to confirm your request.
•• Line access	These commands allow you to assign lines to each DN.
	You can copy the settings from one DN to another.
••• Line assignment	Use these settings to determine which lines are assigned to the telephone.
	You can also define how incoming calls on those lines will be handled.
•••• Show line:______	Enter the numbers of the lines to be assigned to the telephone.
••••• LXXX:Unassigned	Assign the line by pressing the CHANGE soft key to choose how you want
	the line to show on the telephone (Appr & ring, Ring only, or Appr only).
	You can use the SCAN softkey to determine which lines have been assigned.
••• LinePool access	Use this menu to define which line pools a telephone, DISA DN or AutoDN
	will access.
	All lines except ISDN PRI lines use lines A to 0. PRI lines use PRI-A, Pri-B,
	etc.
•••• Line Pool A:N	Scroll through the line pool listing and select the pools to assign to the
	telephone.
••• Prime line: I/C	This setting determines the first line selected when the user makes an
	outgoing call. If you select a line or line pool as prime line, the line or line pool
	must be assigned to the telephone.
••• Intercom keys	Select the number of intercom buttons on a telephone for accessing internal
	lines and line pools.
••• Answer DNs	Enter the DN of another telephone. This set performs the indicated function
	when the other set receives a call. You can assign up to five answer DNs.
•••• Show set	Enter the DN of the telephone for which this telephone will have an answer
	button.
•••• XXXX:Unassigned	Assign the answer DN by pressing the CHANGE soft key to choose how you
	want the line to show on the telephone (Appr & ring, Ring only, or Appr only).
	You can use the SCAN soft key to determine which DNs have been assigned.
••• OLI#	Enter the 10-digit outgoing line identification number.
•••• OLI # as calld	For some ISDN devices (for example, video conference sets) this allows the
	OLI digits to replace the internal DN digits on the ISDN device call setup.
	(Profile 1 and 4 only.)
•• Capabilities	These commands allow you to select the call features for a telephone.
••• Fwd no answer	Redirect all incoming calls when this telephone does not answer.
•••• Fwd to	Enter the external number or the DN of the telephone to which you want to
	redirect all incoming calls.
•••• Forward delay	Select the number of rings before an unanswered call is forwarded. The
	heading appears only if a Forward no answer external number or DN is
	assigned.
••• Fwd on busy	Redirect all incoming calls when this telephone is busy with another call.
•••• Fwd to	Enter the external number or the DN of the telephone to which you want calls
	to be redirected when this telephone is busy.

Modular ICS 6.1 Programming Record P0603536 02